SUNFARM™ RACKING SYSTEM
			Angle Adjustments Available For projects that require seasonal tilt angle adjustments to maximize power production and alleviate snow issues, a Swivel Mount is available for the SunFarm.
A Good Harvest is Upon Us. As the Ontario solar industary begins growing exponentially, there will be completely new challenges in succesfully operating solar farms in harsh winter climates. The engineers have been actively confronting issues such as snow obstruction and temperature fluctuations for years. In solving these hurdles, they have developed technology that revolutionizes the way solar installations are made. In what most see as just another expense in their projects, WSE has rethought what a solar system should be and redesigned the construction process with modern methods and advanced engineering to help fasttrack solar PV into the era of grid parity. Discover the SunFarm ground-mounted racking system.
		Extrusion The SunRail extrusion is used for the entire assembly. Rail Material 6005 T5 aluminium. Clamp material 6063 T5 aluminum with stainless steel bolt and lock nut. Finish Mill finish or anodised to the desired color on demand. Tilt range 25° - 65° degrees (with Swivel Mount) Wind load 90mph Load capacity 50PSF Warranty 10 years limited warranty

Redefining the Solar Farm. As they looked at the methods used for the installation of solar farm arrays, the WSE engineers found that construction teams would spend months on end assembling structures to then have to mount panels one by one. Most projects, however, demand a much shorter timeframe for completion. This is especially true in Northern climates, where the winter imposes an inevitable deadline. Solving those challenges led to a solution that redefines what a solar farm should be. Solar farmers can now leave their plows and sickles in the shed, StructuralPV is the new standard. How it works. StructuralPV™ modules are made of several crystalline PV panels pre-assembled in factory, where they are reliably mounted into a solid structure, connected and tested assembled. The StructuralPV™ modules are then shipped directly to the project site, where they are installed with modern construction methods, which dramatically increases speed, reduces labor cost, maximizes power output and results in a very solid and reliable system. StructuralPV™ Features Mono-crystalline PV panels pre-assembled and tested in factory. Delivered to the project site pre-assembled and ready to install. Output per StructuralPV up to 3.6 KW (12x300W panels). Benefits of StructuralPV™ 3% more power output: factory pre-assembly avoids panel mismatch. Installation up to 4X faster with same team of workers. Installed with a crane, resulting in significantly lower labor costs and thus lower project costs. Once assembled, system is very solidly built and weather-resistant. Tested assembled, assuring maximum reliability. Save $0.25 on contingency and management fees.
		Faster Installation
		Contingency & Management Fees
		Overall Project Cost
		More kWh Output

Want to do things the usual way? For those preferring on-site assembly to Opsun’s StructuralPV™ solution, the SunFarm™ also has a lot to offer. Using the system allows installations to be completed faster than with other solutions and produces more reliable results.
	A Single, Unique Extrusion Because the system uses only one aluminum extrusion, the same as for the SunRail mounting system, it is simple in design. The SunRail extrusion provides exceptional strength for even the most heavy-duty projects, at a very competitive cost. The unoque aluminum extrusion is delivered to the project site in lengths of up to 24 feet, where it can be conveniently cut by the installer to fit any system size.	Quick and Easy to Assemble The Sunjoint clamps are a small set of folded metal pieces with bolts and lock nuts that are used to rapidly and conveniently assemble the SunRail extrusions and PV panels together. The clamps only require a wrench and can be tightened with one hand to build a solid mounting structure for virtually any project type or size
		Rail Clamp	Panel U-Clamp	Panel Clamp	Panel L-Clamp

For all other inquiries and questions regarding Solar

Simply pickup the phone and call 1 306 244 8808

Brayden Ext 239

brayden@wsetech.com

Click here to Contact WSE

For Technicial and Engineering Assistance contact Ray Lewerenz

Ray.Lewerenz@wsetech.com

If you live in Ontario and would like to find out if PV Grid Tie Systems makes sense

Talk to Samantha samantha@wsemicrofit.com or call 519 942 2222

Provinces such as Ontario are paying up to $.80 a kilowatt

Dealer Inquiries Welcome

Become A Dealer

Become involved with a dynamic company and dynamic industry that will see exponential growth and opportunities over the next 20 years. The key is to get in NOW before it is too late.

Talk to our President Larry Fedoruk 1 306 244 8808 or Email

Information about become a dealer click here

WSE Technologies
303 - 47Str. E
Saskatoon
Saskatchewan
Canada
S7K 5H2

Ph: 1 306 244 8808
Fax: 1 306 244-9970

We accept Visa and Master card.

WSE twitter